Ubiquiti Discovery For Mac

  
Ethernet Cable

Important Note: This video is made for Educational and Informational Purpose Only.Important Note: This video is made for Educational and Informational Purpos. Mac users interested in Ubnt discovery 2.3 free download generally download: Discovery Tool 611.0 Free Discover Ubiquiti devices (access points and stations) within subnet (s) associated to the servers network interface (s). Mac users interested in Ubnt discovery 2.3 free download generally download: Discovery Tool 611.0 Free Discover Ubiquiti devices (access points and stations) within subnet(s) associated to the servers network interface(s). Ubnt Device Discovery Tool free download - iCloud Remover Tool, HP USB Disk Storage Format Tool, Windows USB/DVD Download Tool, and many more programs.

Ubiquiti Discovery For Mac

System Requirement

Web Browser: Google Chrome (Other browsers may have limited functionality.)

LED

White

Factory defaults.

Flashing White

Initializing.

Alternating White/Blue

Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place.

Blue

Device is working properly.

Shutdown Button

Press the Shutdown button to initiate a graceful shutdown (all services will be shut down and the CPU will remain active). After pressing the button, wait until the LED goes off, and then unplug the Cloud Key.

Ethernet Port

This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by an 802.3af PoE switch, such as the UniFi PoE Switch.

Reset Button

The Reset Button serves two functions:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

USB Type C Power Port

Optional power source (5V, minimum 1A) if PoE is not available.

microSD Slot

This slot is used to back up the Cloud Key configuration to the microSD card (included).

Use an 802.3af-compliant switch, such as a UniFi Switch, or a USBpower source (not included).

UniFi Switch

OR

USB Power Source

The UniFi Controller software is pre-installed on the UniFi Cloud Key. Use one of the following methods to launch the software:

  • If you are using Chrome, go to the Chrome Instructions section (recommended).
  • If you are using a different web browser, go to the Instructions for Other Web Browsers section.

Chrome Instructions

  1. Ensure that your host system is on the same Layer-2 network as the UniFi Cloud Key.
  2. Launch the Chrome web browser and type https://unifi.ui.com in the address field. Press enter (PC) or return (Mac).
  3. Enter the username and password for your Ubiquiti account. Click Sign In.
  4. Enable the Discover Cloud Key option at the top right.
  5. If the Ubiquiti Device Discovery Tool is already installed, proceed to step 7.

    If the tool is not installed, you will be prompted to add it. Proceed to step 6.

  6. To install the tool:
    1. Click Install.
    2. Click Add app to confirm.
  7. The Ubiquiti Device Discovery Tool will search for the UniFi Cloud Key. Click Adopt in the Cloud Key’s Actions column to continue.
  8. If the Cloud Key firmware is not the latest version, click Upgrade Firmware to upgrade the firmware.
  9. Click Open Controller Wizard to set up the Controller on the Cloud Key.
  10. The UniFi Setup Wizard screen appears. Follow the on-screen instructions. Then, click Finish to save your changes.

    Note: For step-by-step instructions, refer to the User Guide, which is available at ui.com/download/unifi

  11. Enter your ui.com account credentials and click Enable Cloud Access.
  12. Go back to the UniFi Controller tab (https://unifi.ui.com) in your browser and wait for the UniFi Controller to be adopted.
  13. Click Launch to open the UniFi Controller remotely.

The UniFi Controller management interface will appear. You can manage your UniFi devices and view network statistics using the UniFi Controller management interface.

For information on configuring and using the UniFi Controller software, refer to the User Guide located on our website: ui.com/download/unifi

Instructions for Other Web Browsers

  1. Ensure that your host system is on the same Layer-2 network as the UniFi Cloud Key.
  2. The UniFi Cloud Key is set to DHCP by default, so it will try to automatically obtain an IP address. Assign a specific IP address to the UniFi Cloud Key, or check the DHCP server for its IP address.
  3. Note: The default fallback IP address of the UniFi Cloud Key is 192.168.1.30.

  4. Launch the web browser. In the address field, type https:// followed by the appropriate IP address. Press enter (PC) or return (Mac).
  5. Click Manage to run the UniFi Setup Wizard.
  6. Note: You can click Configure to change the settings of the UniFi Cloud Key. The default login is ubnt/ubnt.

  7. The UniFi Setup Wizard screen appears. Follow the on-screen instructions. Then, click Finish to save your changes.
  8. Note: For step-by-step instructions, refer to the User Guide, which is available at ui.com/download/unifi

After the UniFi Setup Wizard is finished, the UniFi Controller management interface will appear. Log in with the Admin Name and Password that you created, and then you can manage your UniFi devices and view network statistics using the UniFi Controller management interface.

For information on configuring and using the UniFi Controller software, refer to the User Guide.

UC-CK

Dimensions

21.7 x 43.4 x 121.9 mm
(0.85 x 1.71 x 4.80')

Weight

110 g (3.88 oz)

Networking Interface

(1) 10/100/1000 Ethernet Port

Buttons

(1) Reset to Defaults

Shutdown

Power Method

PoE48V 802.3af or
Passive PoE (Pairs 4, 5+; 7, 8-)
USB-C5V

Power Supply

802.3af PoE or
USB-C 5V, Minimum 1A

Max. Power Consumption

5W

Operating Temperature

0 to 40° C
(32 to 104° F)

Operating Humidity

20 to 90% Noncondensing

Certifications

CE, FCC, IC

Discovery Tool is a convenient tool for detecting Ubiquiti Networks® devices
1.4.1
2019-07-05
Downloads: 100,000+

Ubiquiti Device Discovery Tool for PC on Windows 10/8.1/8/7 & Mac Laptop

Ubiquiti Device Discovery Tool is a Tools app developed by Ubiquiti Networks, Inc. The latest version of Ubiquiti Device Discovery Tool is 1.4.1. It was released on 2019-07-05. You can download Ubiquiti Device Discovery Tool 1.4.1 directly on Appforpc.net. Over 445 users rating a average 445 of 5 about Ubiquiti Device Discovery Tool. More than 100,000+ is playing Ubiquiti Device Discovery Tool right now. Coming to join them and download Ubiquiti Device Discovery Tool directly!

Description of Ubiquiti Device Discovery Tool

Ubiquiti Device Discovery Tool is an app allowing you to discover and see Ubiquiti devices on your local network. You can filter those devices by type (UniFi, airMAX, EdgeMAX…) or by using search.
The app also provides basic info about discovered Ubiquiti devices (IP address, MAC address, firmware version).
Note: Devices managed by UniFi® Controller cannot be discovered by this app

Changelog / What's New

We’ve improved the Discovery app and changed its name. Upgrade to WiFiman!
Read more

Download Ubiquiti Device Discovery Tool for PC on Windows 10/8.1/8/7 & Mac Laptop

To be clear about download process of Ubiquiti Device Discovery Tool for PC, it is not available directly from the web. As of now, the app developer have made it available for only Android Platform. To enjoy using it on your PC device, installation of Android Emulator is mandatory.

Install flash player mac. For doing all these things on your Computers & Laptops, you need to download Ubiquiti Device Discovery Tool for PC/Laptop with Operating systems Windows 10/8.1/8/7 or Mac.

There are two ways of downloading this app on Laptop/PC. Use anyone, NOX App Player or Bluestacks for this purpose. As both of them support APK installation, you just need to install them on your Desktops and Install com.ubnt.discovery.app-v1.4.1.apk file with it so that you can enjoy Ubiquiti Device Discovery Tool services on PC using NOX or Bluestacks. I will explain both methods here; you can choose anything you want.

As I was telling earlier, in this post, I will demonstrate two procedures, let’s see the first method of downloading Ubiquiti Device Discovery Tool for PC using Bluestacks emulator.

Install Ubiquiti Device Discovery Tool for PC Windows using BlueStacks

  1. Firstly, You should install Bluestacks Software on your Computer or Laptop. Click here to download bluestacks for PC. (Note: Come back to this post once you installed bluestacks correctly)
  2. After Bluestacks, now, you must download .APK file of Ubiquiti Device Discovery Tool. Click here.
  3. Open the Bluestacks App already installed on your PC/Laptop. In the left-hand corner toolbox, you will find an option of Add APK. Load the APK file using the option on the Bluestacks. Click on that.
  4. It will ask about the location where you have kept the downloaded APK. In my case, I have kept it on Desktop, so I am selecting that.
  5. It will now automatically install the application on Bluestacks. You will find the Ubiquiti Device Discovery Tool on applications tab on the main screen of the Bluestacks window.
  6. Now, you are all set to use Ubiquiti Device Discovery Tool on PC. Here is the Ubiquiti Device Discovery Tool successfully running on my PC after installing and clicked on the app.

Now, we should discuss the installation of Ubiquiti Device Discovery Tool on PC using NOX App player. You can use this method if Bluestacks method is not working properly on your Laptop or Computer.

Discovery

Install Ubiquiti Device Discovery Tool on PC Windows using NOX App Player

  1. First of all, you must download Nox App player – https://www.bignox.com, click on the software to start installation on your Computer/Laptop.
  2. Now, download APK file from here.
  3. After installation, open the NOX player. In the right-hand side corner toolbox, you will find an option of Add APK. Click on that option.
  4. Select Don’t show again and click on I know.
  5. You have to choose the APK from the downloaded location. As I have saved it on the desktop, I choose from there. (If your downloaded file is in Downloads area, select the .APK from there itself)
  6. Nox will automatically install the Application. Open it from the home screen of Nox app player.
  7. You will then be asked about if you want to change your location from ‘Worldwide’ to any particular location. Initially, choose Later option.
  8. Now, you are ready to use the App with some pre-existing website links embedded in the App.
  9. Note: Use ESCAPE to come back to the home screen or else you can use the symbols to operate Ubiquiti Device Discovery Tool app on PC NOX app player.

We feel that you will not get any hitches while downloading the App through the suggested ways. If you do encounter some problem, do share it with us.

Ubiquiti Discovery Mac

1.4.12018-11-29
1.4.02018-11-15
1.2.32018-05-28
1.2.22018-01-22
1.1.02017-07-17
1.0.42018-09-16
1.0.32018-09-16
1.0.22018-09-16